1; twist the mirror to allow access to the 2 mounting bolts and undo both with 10mm socket or tube spanner.
2; release the electrical connector by pushing the tab and pulling it apart.
3; remove the black rubber gasket from the base of the mirror. then remove 3 screws and the metal base comes off. then there is 1 screw into the motor that needs removing.
4; carefully lever up the actual mirror from the bottom with something wide, like a paint scraper so you don't crack the mirror. it should un-clip and tilt up away from the main housing. then just wriggle it free from the top mounts.
5; undo the screws to release the plastic mirror surround from the housing. note, there is a clip that you have to release, it's in the picture near the silver housing. (narrow black peice sticking up)
6; undo 3 screws from the white housing and it comes out still attached to the wiring.
7; undo more screws and remove the black plastic backing plate.
8; motor should now be free to remove ( might require some wriggling) and job is done.
hope that is all clear and easy to follow.
This guide has been taken from ftoaustralia
No comments:
Post a Comment